PL / LED / EX
Applications: Building regulatory exit-route indication
LED Exit Sign Features:
- Provides up to 5 hours of emergency light
- Samsung LED chip
- Lamp type: 1 x 2W LED
- Die-cast aluminium housing
- White epoxy finish
- Slim-line / Super thin
- Low battery discharge protection
- Reverse battery Protection
The Emergency Exit Sign range of luminaires is ideally suited as stand-alone / self-contained surface mounted fittings in new or existing buildings, as required by regulations.
The Emergency Exit Sign housing is a white epoxy powder coated steel frame with a green “EXIT” legend. The LED lamp is protected by a translucent opal polycarbonate diffuser that is attached to the body by means of specially designed and integral clip mechanism.
The emergency exit sign contains a driver, 1x LED, associated control gear and ni-cad batteries for emergency power within the exit sign. Connection to the mains is by means of an internal terminal connector. These luminaires are available in the following versions: non-maintained, maintained or self-testing.
The LED arrangement provides a uniform illumination of the signs / legends with a high level of emergency illumination at floor level or at the threshold of an exit door. 5 hours are provided of emergency lighting with the ni-cad batteries.
A safety start circuit is provided to prevent emergency operation until mains are connected. This enables installation without disconnecting or unneccessarily depleting the batteries. Deep discharge protection is provided.
These Exit sign luminaires can also be connected to 12V or 24V dc central battery systems with maintained or non-maintained operation.
Luminaires are constructed to ensure that the batteries are never subjected to a high ambient temperature which accelerates the deterioration of the battery cells.
The exit signs fully satisfy the requirements os SANS 1186-1:2003 and SABS 0114-2 and are designed to conform to the SANS 1186-3:2004. The use of graphic symbols in conjunction with text and appropriate arrows enable easy recognition of escape routes.
All incoming wiring is terminated within a terminal block that is provided in the base. Normal and emergency control gear is mounted on a plug-in removable gear tray. Knock-outs are provided in the top of the luminaire, with besa box mounting facilities in the back.
Various alternative types of fixings are available (ie. ceiling or cantilever brackets etc.)
All luminaires are supplied with the appropriate lamps and the specified exit sign / legend.
LED Exit Sign Specifications
Type: LED Bulkhead
IP Rating: IP22
Control gear: Premier branded gear only
Voltage: 230V +3%/-10% 50Hz
Power factor: >0.9
Size: Large: 600 x 210 x 25
Small: 355 x 145 x 25
Body colour: Black
Material: Diecast aluminium alloy
Warranty: 3 years (control gear only)
Conformance: IEC/SANS 60598-1, SANS 0114-2 and SANS 1186 parts 1 and 3